ISCAR Product Lines>Turning
helido 845 > Insert replacement
 
 
Face-InsertReplacement

Insert Replacement

• Simple to operate.
• Controlled rotation requires low force.
• Guarantees limited upper jaw movement and secures maximum
   load on blade.
• Two extractor pins are placed in the two holes in the holder blades.



















Indexing
• Place the EDG Extractor in the holes as shown in Fig 1.

• Step 1 - Press the extractor to the lower jaw of the tool.
• Step 2 - Slightly press the upper pin to the maximum possible.
• Step 3 - Rotate the eccentric handle to lift the upper jaw.