| |
 |
| |
Solid Carbide Endmill Cuts Production Time in Half
ISCAR is introducing the EFS.. B44 FINISHRED, a revolutionary solid carbide endmill family. The FINISHRED endmill is a combination of both roughing and finishing endmills in a single tool. Roughing endmills remove material from workpieces more rapidly and efficiently than conventional endmills. However, roughing endmills leave grooves on the machined surface. Consequently, after using a roughing endmill,
a finishing endmill has to be used in order to obtain a smooth surface finish. This means timeconsuming tool change, setup time and necessity of maintaining two endmills in the machines magazine and keeping two types of tools in stock.
Features:
The EFS.. B44 endmill features 4 flutes with a 45° helix, two serrated flutes and two continuous flutes.
The tool is fully effective and enables running at rough machining parameters, resulting in finish surface quality.
The unique tool design reduces vibration at high load applications.
The tool produces short and long chips simultaneously. This chip mixture is evacuated more easily than each individual chip type -
an excellent solution in slotting and cavity milling applications.
One tool change and setup time can be eliminated.
A single tool replaces the roughing and finishing endmills, dramatically reducing cycle time and increasing productivity.
Extra tool position is gained on the machine.
Eliminates the need to keep a large amount of stock.
4 flutes: 2 serrated plus 2 continuous flutes.
Excellent performance and tool life.
Suitable for all types of steel.
Excellent performance in machining titanium, Inconel, stainless steel and high temperature alloys.
|
|