TECHKNOW

Resize
Dock/Undock
NEW FAQ ADDED
X
Our website uses cookies and other technologies to ensure you get the best browsing experience.

You can change your cookie settings at any time.

Find out more on how we use cookies.

TURNING
NPA 12/2019


ISO-TURN

Anti-Vibration Boring Bars with Exchangeable Turning Heads


Highlights
ISCAR is introducing a new line of vibration dampening boring bars intended for large L/D boring ratios.


One of the most common turning applications is the boring of components, also known as internal turning. The most widespread tools used for this type of machining operation are boring bars.
ISCAR currently offers a wide range of steel and solid carbide bars that carry various insert geometries for different internal turning applications.
When selecting a boring bar for internal turning operations, the depth of the machined hole vs. its diameter and the material type influences the choice of the tool.
Large L/D ratios may cause tool deflection and vibrations, influencing the obtained accuracy and surface finish.





In order to cover the complete range of applications for internal turning, ISCAR has developed a comprehensive series of high-quality internal boring bars for different insert geometries, covering all machining applications from 4xD to 10xBD.

ISCAR offers three types of boring bars: solid steel, solid carbide and anti-vibration. The maximum overhang for solid steel boring bars is up to 4xBD. This limitation is due to the fact that machining with a longer length of steel shank (more than 4xBD) can induce unwelcome vibrations due to the elasticity and characteristics of the steel.
In order to limit the vibration on a higher overhang of more than 4xBD and up to 6xBD, the use of solid carbide boring bars is recommended. Solid carbide boring bars represent an excellent, highly efficient option for boring applications of up to six times the tool’s machining depth. This capability is attributable to solid carbide possessing a coefficient of elasticity that is three times higher than that of steel.

However, when the machining of high overhangs of more than 6xBD is required, even the use of a solid carbide shank can cause vibrations. Therefore, in these cases the use of solid carbide can be somewhat limited.

Boring Bar Selection Guide According to Overhang to Bar Diameter Ratio

Overhang
ANTI VIBRATION SHANK, Up to 10D
SOLID CARBIDE SHANK, Up to 7D
STEEL SHANK, Up to 4D
L (inch)
Deep turning
Deep turning solutions for machining high depth to diameter internal applications include special anti-vibration boring bar systems with a ‘live’ vibration dampening system located inside the tool body.

A product of ISCAR’s prolific R&D department, innovative WHISPERLINE anti-vibration boring bars have been designed to significantly reduce and even totally eliminate vibrations when working with a high overhang from 7xBD to 10xBD.
Situated inside these ingenious tools is a unique damping mechanism that consists of a heavy mass that is supported by a rubber spring element containing oil to increase the required dampening effect.



In addition, the system contains other elements which help to further reduce vibrations. The reactive damping mechanism comes into action during machining with high overhang work depths and acts as an effective counter to vibrations.

The highly effective, anti-vibration damper effect is applicable for large D.O.C and high feed rates, and ensures continuous, efficient machining. ISCAR’s inspired WHISPERLINE anti-vibration tools considerably improve machining stability and enhance insert life. These factors enable meaningful increases in productivity to be achieved, improvements in surface quality on high overhangs to be attained, scrap levels to be reduced and users’ profitability to be enhanced.


WHISPERLINE anti-vibration tools enable the delivery of internal coolant to be supplied directly to where it is required - the insert’s cutting edge. The efficient distribution of coolant increases the insert’s tool life by reducing temperature and also improves chip control and chip evacuation.


The WHISPERLINE anti-vibration turning tool line enables the fitting of a wide range of cutting heads with a range of different insert geometries, including all ISCAR standard ISO turning inserts for different applications, which offers great flexibility.



The WHISPERLINE boring bars represent a cost-effective, modular system with a wide range of standard shanks with diameters of .625”, .750”, 1.00”, 1.25”, 1.50”, 2.00” and 2.50”. The flexible boring bars are able to carry eight different interchangeable boring heads for the following inserts:
CCMT, VCMT, DCMT, DNMG, VNMG, CXMG and CNMG.


Insert geometry
Correct insert geometry is a very important factor when using anti-vibration boring bars. The most recommended insert geometry for successful anti-vibration use is a positive geometry insert with a positive rake angle, as this shape exerts a lower tangential cutting force when machining.

Choosing the appropriate nose radius of the insert is also a vitally important consideration. A lower nose radius is recommended as this configuration significantly reduces the cutting forces, due to the lower contact between the insert and workpiece, which helps to limit and reduce vibration.
A greater nose radius creates much larger radial and tangential cutting forces that can produce unwelcome vibrations.


TInserts with the benefit of appropriate chip breakers are recommended for improved chip evacuation, as the production of long and curled chips can cause a range of problems when working with long overhang tools. In addition to increasing vibration during machining, long and curled chips are liable to spoil or damage the surface quality of the workpiece. Highly recommended ISCAR chip breakers for anti-vibration tools are the F3P/F3M for finish machining applications using a small D.O.C.; and the M3P/M3M, for medium applications.

These highly-efficient chip breakers ensure excellent chip control and the creation of small chips which can be evacuated more easily with the help of the coolant supply.


An important factor in reducing vibrations is ensuring the clamping stability of the anti-vibration boring bar. Secure clamping helps users to achieve the correct workpiece dimension, which results in excellent workpiece surface quantity and assists in avoiding vibrations; clamping length should be 4XBD.

Clamping of WHISPERLINE anti-vibration boring bar


Clamping length




AVC-SCLCR/L
Interchangeable Boring Heads Carrying 80° Rhombic Inserts with 7° Clearance
* Optional, should be ordered separately



AVC-DDUNR/L
Interchangeable Boring Heads for 55° Rhombic Inserts
* Optional, should be ordered separately


In order to correctly select the head size which fits the preferred shank, make sure that head dimension DCONMS is equal to the dimension DCONWS on the shank.



AVC-SVLCR/L
Interchangeable Boring Heads Carrying 35° Rhombic Inserts with 7° Clearance
*Optional, should be ordered separately



AVC-SDUCR/L
Interchangeable Boring Heads Carrying 55° Rhombic Inserts with 7° Clearance
* Optional, should be ordered separately


AVC-DVUNR/L
Interchangeable Boring Heads for 35° Rhombic Inserts
* Optional, should be ordered separately


In order to correctly select the head size which fits the preferred shank, make sure that head dimension DCONMS is equal to the dimension DCONWS on the shank.



AVC-SVUCR/L
Interchangeable Boring Heads for 35° Rhombic Inserts with 7° Clearance
* Optional, should be ordered separately



AVC-PCLNR/L
Interchangeable Boring Heads for 80° Rhombic Inserts



AVC-PCLXR/L
Interchangeable Boring Heads for 80° Rhombic Inserts



In order to correctly select the head size which fits the preferred shank, make sure that head dimension DCONMS is equal to the dimension DCONWS on the shank.



AV-D
Anti-Vibration Bars with Through Coolant for Interchangeable Turning Heads
(1) Maximum overhang
(2) S-steel body, H-solid carbide body



(1) Cannot be shortened



In order to correctly select the head size which fits the preferred shank, make sure that head dimension DCONMS is equal to the dimension DCONWS on the shank.





The NPA 012-2019's pdf file: View (PDF) or Download (ZIP)
Terms of Use and Legal Disclaimer    Privacy Statement
© ISCAR LTD. Manufacturer of Metalworking Tools (Iscar.com) All Rights Reserved